+372 501 5184
info@ekareng.eeMAIN TECHNICAL DATA
Production parameters
Chemical reagents and components
Name
The standard,
kg/hour
Anti-foaming agent
0,001
Coal 207EA
0,175
Coal 207C
0,057
Alumagel
0,114
MEA
6,400
Energy resources and water
Name
Standard, kW/h
Electric power
900
Name
m3/hour
For the production of demineralized water
3,50
For feeding open cooling towers
4,20
For household needs
1,00
Technical data
Name and
general requirements for
equipment,
parameter
Type, size, quantity
1
2
Appearance, installation quality
in accordance with the installation diagram and the standard sample, no defects are allowed
Classification of environmental conditions - moderate according to GOST 15150-69, accommodation category 2
suitable for operation at ambient temperatures from minus 30°C to plus 40°C, relative humidity up to 98% at plus 25°C
Productivity (in agreement with the customer) kg/h, at least
2500
Flue gas inlet temperature, ºС
350
Inlet fire gas pressure (excess), mBar
0...30
CO2 output temperature, ºС
minus 24...minus 27
The pressure of the resulting gas, bar
15…18
Efficiency, %, not lower
75
Time to enter operating mode, min., no more than
30
Demineralized water consumption, m 3/h, no more than
2
Pressure in the pneumatic line, Bar, no more than
6
Recommended heated area (including water treatment and operator room), m²
432
(24x18 m)
Weight of the equipment installed in the room, kg
45000
Recommended area for the installation of outdoor equipment
144
(18x8 m)
Weight of outdoor equipment (excluding flue gases), kg
86000
Nominal supply voltage, V
380 (three-phase current)
Power supply frequency, Hz
50…60
Supply voltage in the control circuit, V
24 (direct current)
Power consumption (excluding auxiliary units), kW
620
Specific energy consumption, kW/t CO2
455
Refrigerant type
R404Freon
Name and general requirements for
equipment, parameter
Type, size,
quantity
Adjusted sound power level, dB A, no more than
110
The surfaces of the extraction station, made of non-corrosion-resistant materials, are painted.
Metallic and non-metallic (inorganic) anticorrosive coatings must comply with the requirements of EN ISO 12944
The tightness class of equipment operating under pressure and its fittings is set in accordance with EN 60529.
Large-sized units (including column equipment) are disassembled for easy transportation to the customer's site.
To issue a technical proposal in which all parameters are determined in relation to the customer's specifications, it is necessary to first determine the composition of the fire gas.
To start working on developing a technical proposal, you must at least fill out a questionnaire (attached).
After that, an accurate model of the extraction station is developed with the customer's specialists, a contract is concluded, and the project development begins.